Taga Harmony HTA-700B v.3-USB, Instruction Manual

Page: 14 / 20

14
Bluetooth
®
Connection
• After the amplifier is switched on - the built-in Bluetooth
®
receiver is waiting to be
paired with a Bluetooth
®
source.
• Select the BT input – the blue BT LED indicator will be flashing.
• Select Bluetooth
®
on your audio source (smartphone, laptop etc.) and start scanning
for available
Bluetooth
®
devices.
• After a short time “HTA-700B v.3” will appear on the screen of your audio source.
Select “Pair” on your audio source to connect with the amplifier.
After connection is successful the BT LED indicator will be illuminated continuously
and it will remain illuminated as long as the current connection is active.
• HTA-700B v.3 will now be ready to play your music wirelessly within a range of
approximately 7 meters. Start playback on your audio source.
Note! Please refer to your audio source user instruction for details on operating the
Bluetooth
®
. Operation and names of specific functions can vary on different devices.
Important Notes - Bluetooth
®
Connection
• As long as the amplifier is not switched off for longer than 10 seconds – the current
Bluetooth
®
connection is active (even if you change the input). After that time the
connection is lost and you will have to repeat the pairing procedure.
• When you move away from the working range of the HTA-700B v.3 Bluetooth
®
receiver for longer than 60 seconds, the current
Bluetooth
®
connection will be lost
and you will have to repeat pairing procedure. Within 60 seconds the connection can
be automatically reconnected.
• When you want to use another Bluetooth
®
audio source than currently active,
you have to disconnect the active connection and start the Bluetooth
®
connection
procedure.
• Make sure the antenna is securely and firmly installed as well that it is not obscured-
otherwise the “HTA-700B v.3” Bluetooth
®
device may not be found or connection may
be unstable.
Operation