TAG MIL-BOOK 200 Series Operator'S Manual Download Page 12

Page: 12 / 143

1-2 Getting

Started

Getting the Computer Running

This section guides you through the procedures for getting the computer
ready for operation.

Unpacking

After unpacking the shipping carton, you should find these standard
items:

Notebook computer

Accessories:

−

AC adapter (100~240 VAC, 50/60 Hz)

−

AC power cord (US/CE/UK/SA)

−

Car adapter (option)

−

Extra battery pack (option)

−

Touchscreen pen (option)

−

Driver CD

−

This

Operation Manual

−

Vehicle docking (option)

−

Office docking (option)

−

Carrying bag (option)

Inspect all the items. If any item is damaged or missing, notify your
dealer immediately.

Keep the shipping carton and packing materials in case you need to ship
or store the computer in the future.

Connecting to AC Power

The computer operates either on the external AC power or internal
battery power. It is suggested that you use AC power when you start up
the computer for the first time.

CAUTION: Use only the AC adapter included with your computer. Using other AC

adapters may damage the computer.

Summary of Contents for MIL-BOOK 200 Series
















































































































































Search results

Summary of Contents for MIL-BOOK 200 Series

Reviews:

Brands by name

Popular brands

TAG MIL-BOOK 200 Series, Operator'S Manual

Search results

Summary of Contents for MIL-BOOK 200 Series

Reviews:

Brands by name

Popular brands