TAG GD700 User Manual Download

Page: 71 / 74

Chapter 5. Using the DashON Utility

Overview

The DashON resident program is designed to provide near-instant access to your device’s settings
and configuration within a single, easy to use interface.

The following information illustrates and describes the various settings available for configuration
through the DashON menus.

Important:

Do not terminate or remove the DashON program manually or the ambient light sensor

and the function buttons will malfunction.

Download the latest information and documentation through the TAG Global Systems official site:

www.TAGGlobalSystems.com

Table 7 . DashON Overview

Function

Description

EXIT

Minimize DashON and return to the desktop.

Button Lock

Lock or unlock all the physical buttons except Power button.

Screen Auto Rotate

Disable or enable screen auto rotate function.

Airplane

Turn on or off the airplane mode.

Battery

Shows the battery level or charging status.

Brightness

Adjust brightness level and enable or disable auto brightness function.

Volume Control

Adjust volume level and enable or disable mute function.

GNSS

Disable or enable GNSS function.

Wi-Fi

Disable or enable Wi-Fi function.

Bluetooth®

Disable or enable Bluetooth® function.

Touch Screen Lock

Lock or unlock the touch screen.

ECO Mode

Disable or enable ECO mode to save battery life when using the device.

Power Plan

Manage how your tablet uses power.

Info Viewer

View system specifications. The menu is for display only.

Display Switch

Choose a display mode when connect to another output device.

Button Setting

Predefined functions settings. Supports function button customizing.

Camera

Use the rear camera to take photos and videos

TAG GD700

Page 65 of 68

Summary of Contents for GD700











































































Search results

Summary of Contents for GD700

Reviews:

Related manuals for GD700

Brands by name

Popular brands

TAG GD700, User Manual

Search results

Summary of Contents for GD700

Reviews:

Related manuals for GD700

Brands by name

Popular brands