technical data
|
47
46
|
technical data
analog output
channel separation
greater than 100 dB at 1 kHz
steps of ±0.5 dB
10-35 °C
50–60 Hz
90–100 V, 110–120 V or 220–240 V
The voltage is marked on the rear of the unit
less than 30 W
445 mm wide
75 mm high
338 mm deep
power consumption
ac supply
voltage
ac supply
frequency
operating temperature
range
analog output
volume control
dimensions
(including feet, terminals
and controls)
The rated and typical performance applies when the mains supply voltage is either 230 V AC for
220–240 V units, 115 V AC for 110–120 V units and 95 V AC for 90–100 V units.
0 dB (i.e. the tape output level is the same
as the analog input level)
phono socket
47
Ω
nominal
greater than 9.0 V rms
24-bit/192 kHz 128-times oversampling
multi-bit sigma delta DAC
2 Hz–20 kHz (±0.5 dB)
0.1 Hz–50 kHz (- 3 dB)
greater then 104 dB (A-weighted)
less than 0.002% @ 1 kHz
better than ±0.5 dB at 1 kHz
digital to analog
converter
maximum analog
output level
analog output
impedance
analog output
connector
tape output
gain
analog output
frequency response
analog output signal
to noise ratio
analog output total
harmonic dist noise
(0dB full scale)
analog output
channel balance
GRR00780.02-GB DPA32R v1.07.4 11/10/01 2:26 pm Page 46
