care and maintenance
|
43
42
|
running in and warming up
TAG McLaren Audio equipment is designed
to give you optimum performance for many
years.
fuses
There is a fuse in the power socket on the
back of your DPA32R
DAB
. To change a fuse,
unplug the power cable and pull out the
fuse carrier drawer.
The fuse carrier contains a spare fuse; this
is the first one that you see when you open
the carrier.
There are no user-serviceable parts inside
the DPA32R
DAB
.
running in
Just like a high-quality car, the performance
of your DPA32R
DAB
will improve during the
first few hours of operation. The electronic
components will have then reached and
settled down to their optimum specification.
warming up
Every time you switch on your DPA32R
DAB
,
the performance will improve until the
components reach their optimum
operating temperature.
cleaning
In order to maintain the
appearance of your
DPA32R
DAB
, you can clean it
as follows:
before cleaning, always disconnect your
DPA32R
DAB
from the AC supply.
any grease or dirt on the case may be
removed with a soft, lint-free cloth. Do not
use water or any other solutions. Do not
use any solvents or abrasives.
take great care not to get any liquid inside
the case. If this happens, you should have
your DPA32R
DAB
serviced.
ser vice
The only service you should do to you
DPA32R
DAB
is described overleaf. All other
servicing should be carried out by one of
our authorised service agents.
If service is required, please contact your
authorised TAG McLaren Audio retailer. If
your DPA32R
DAB
is still under guarantee,
please refer to the guarantee card which
gives you details on how to claim against
the guarantee.
Please keep the original packaging and
use it whenever your DPA32R
DAB
is
transported.
GRR00780.02-GB DPA32R v1.07.4 11/10/01 2:26 pm Page 42
