manualshive.com logo in svg

TAG MCLAREN AUDIO AvantGarde 100X5R:10, Owner'S Manual

Share
Download
TAG MCLAREN AUDIO AvantGarde 100X5R:10 Owner'S Manual Download Page 27

software upgrades

|

27

One of the flexible aspects of the 100x5R:10 is that it includes a micro-controller using a 
re-programmable memory, which can be re-programmed using a suitably equipped PC
connected via the TAGtronic Programming Cable (optional - not included with the 
100x5R:10).

Details of future upgrades are published on 

www.tagmclaren.com

getting the goods

In order to upgrade the 100x5R:10 with the latest software you need to have the following
items:

1)

A suitably equipped PC to interface with the 100x5R:10

2)

The TAGtronic Programming Cable - not included with the 100x5R:10

3)

The TAGtronic Upgrade Wizard Version v2.10 or later

4)

The 100x5R:10 software you would like to download to your 100x5R:10

Item 2 can be purchased from your retailer or ordered from the online shopping section 
of 

www.tagmclaren.com

. Items 3 and 4 can be downloaded free of charge from

www.tagmclaren.com

- just visit the ‘Club’ and click on ‘software upgrades’.

Once you have installed the TAGtronic Upgrade Wizard to your PC, download the latest
100x5R:10 software and after downloading is complete register it with the Upgrade 
Wizard by double-clicking it. 

reprogramming the 100x5R:10

GRP00940.01-UK 100x5R-10.qxd  10/17/02  5:19 PM  Page 27

Summary of Contents for AvantGarde 100X5R:10


































Reviews:

No comments

Brands by name

Popular brands

Load more brands