20
|
power and loudspeaker connection
Check that the power button is out, so that the power is off when
you plug the unit in
(1)
. Do not connect the power cable until you
have made all other connections.
On the rear panel of the 100x5R:10 you will find up to ten pairs of
loudspeaker terminals, designed to accept high quality 8 mm spade
connectors.
Connection to a Stereo module should be done as described in the
section operating modes; connection to a Monobloc module as
described on page 19.
Only use high quality loudspeaker cables, such as our TAG
McLaren F3-10-SPK, terminated with high quality 8 mm spade
connectors.
power connection
loudspeaker connection
1. The power button is a latching switch. One press will hold it in; the next will release it
GRP00940.01-UK 100x5R-10.qxd 10/17/02 5:19 PM Page 20
