manualshive.com logo in svg

TAG MCLAREN AUDIO AvantGarde 100X5R:10, Owner'S Manual

Share
Download
TAG MCLAREN AUDIO AvantGarde 100X5R:10 Owner'S Manual Download Page 22

22

|

power up and switch on

After connecting your preamplifier / AV processor and your
loudspeakers connect the power cable, supplied to the
100x5R:10

(1)

.

Press the power button in. The blue power LED will come on. The
five module

(2)

status indicators will flash as the amplifier modules

power up sequentially to prevent excessively high current demand
from the mains supply. 

When all five modules have been activated, you should see the five
red LEDs softly illuminated, showing that all five modules have
energised. Then the amplifier is ready to play source material
through the system. Raise the volume level at your AV processor or
preamplifier slowly at first, until sound is replayed through the audio
system. 

Sit back and enjoy!

1. Check that the power button is out, so that power is off when you plug in
2. Assuming you have five modules installed

GRP00940.01-UK 100x5R-10.qxd  10/17/02  5:19 PM  Page 22

Summary of Contents for AvantGarde 100X5R:10


































Reviews:

No comments

Brands by name

Popular brands

Load more brands