background image

 

TAG

Heuer 

Timing 

     

 

 

Page 2 / 8

 

 

1. Generality 

 
This new Radio HL615, is the next logical step in impulses transmission by TAG Heuer Timing. 
It offers high quality performance, due to the technical choices made. 
The Power of transmission is 100mW linked to a frequency in the range of 869 MHz offers incomparable comfort 
and reliability. 
 
Each 

Receiver

 can receive impulses (simultaneously or not) from 4 

Transmitters 

identified by the function 

"

CHANNEL

" (1 to 4), with a precision of 0.13 ms. 

 
The delay of transmission is 200 ms and the distance in good condition, up to 1000 m. 
 

2. Presentation  

 

2.1. Transmitter 

 

 

 

 

1.  Input Impulse – Banana plug 
2. Function 

SET 

3.  Function Channel (chapter 
4.  Function Team (chapter  
5.  Function Test and ON (Set + Test) 
6.  Function BATT and OFF (Set + Batt) 

 
 

 

2.2. Receiver 

                

1.  Output Impulse – Banana Plug (1 to 4) 
2. Function 

SET 

3.  Function Power (ON) / OFF = Set + Power 
4.  Function Team (Chapter 
5.  LED Team / Channel  
6.  LED Reception signal (Chapter 

                 

 

 

 

6

Summary of Contents for HL 615









Reviews: