Taewoo cuTex TBC-50SH, Manual

Page: 4 / 26

E-mail : taewoo@cutex.kr http://www.cutex.kr
- 3 -
How to use sensor TL46-W
①
Mount the sensor on the guide-rail
and connect the jack of sensor into
the connector of machine downside.
★②
Locate the cutting line of label
on the lower knife blade precisely
& move the sensor close to the knife.
(This step is essential just before fix
the location of sensor.)
③
Adjust the sensor with guide-control bolt
for lightening the beam on the center
of marking point.