Taewoo cuTex TBC-50SH, Manual

Page: 3 / 26

E-mail : taewoo@cutex.kr http://www.cutex.kr
- 2 -
▷
Set function.(Sensor cutting : "1", Normal cutting : "0")
☞
Sensor cutting
:
FILE
⇒
1
EXTRA
⇒
SET
☞
Normal cutting
:
FILE
⇒
0
LENGTH
CLEAR
⇒
SET
▷
Running of knife-front roller
Turn on MOTOR SW to prevent cut materials from clinging to the knife blade.
▷
Locate the cutting line of label on the lower knife blade.
(This step must go ahead of sensor adjustment.)
▷
Sensor Adjustment
Light sensor-beam on sensing point of label.
(Refer to "How to use sensor" of next page.)
▷
Press START button.
☞
START
※
Troubles in cutting,
- Check if you adjust sensor after locating cutting line of label on the knife blade.
- Move the sensor forwards or backwards.
- Check sensitivity & height of the sensor.