Tador KX-T927-MTL, Instruction Manual

Page: 8 / 12

8
11.2. RFID – Proximity card erasing or replacing
(remove
programmed card and set new one instead)
For erasing/replacing RFID card you have know the memory sell number where card
have been stored
a. Dial from any telephone to the extension of Tador Codephone.
b. Press the hash key twice (#, #) (the keypad will blink to confirm programming
mode active).
c. To erase programmed card
o
Press 88 and cell number to access the cell where card stored, for instance
88001#
o
Press 88000# to remove programmed RFID card
d. To replace with new card
o
Tap 88#

"cell number" # and couple a new card to device RFID window,
the special tone will hear. For instance 88#

001#
Example: Replace RFID card that stored in memory cell 009
12.
RFID card resetting/initialization
a. Enter the program mode by ##
b. Press 97
c. Press 5555 to reset all programmed RFID, long special tone will heard
d. Press hash (##) key to exit program mode
13.
Door opening delay
This is a time that passing after coupling RFID card to actually lock activation (in standard
situation no need to change).
Usually using when panel located far away from the door. The data located in memory
cell 01.
Example: Set delay time 3seconds
Exit
programming
Couple new
RFID card
Confirm Tap
memory cell
Confirm Enter RFID
programming
Enter program
mode
##
(
hash
)
# 550 # 88
##

Exit Programming mode Approval Initialization code Cell number Enter programming
## # 5555 97
##

Exit Programming mode Approval New value Cell number programming Programming code
##(Hash) # 03 51 ## Call Doorphone