Tador KX-T927-MTL, Instruction Manual

Page: 7 / 12

7
11. RFID – Proximity card programming
The device could be programmed with up to 150 RFID cards
The RFID initialization should be done for virgin device, follow:
11.1.
Add RFID card follow the below instruction:
a. Dial from any telephone to the extension of Tador Codephone.
b. Press the hash key twice (#, #) (the keypad will blink to confirm programming
mode active).
c. Press 88# to enable RFID card programming
d. Couple the RFID card to device RFID window, the special tone will hear
e. Couple the second RFID card and special tone will hear again, for more cards
continue with same action

In case the device is virgin (never programmed RFID cards), the first card will be store
in memory sell 001, second in 002 and so on

In case device already been programmed with RFID cards in past, the first card will be
store in first unfilled sell (Example: you have programmed 10 RFID card in past and
want to add more cards now. The first card you add now will be store in sell 011,
second in 012 and so on)
Exit Programming mode Approval Initialization code Cell number Enter programming
## # 5555 97
##

Exit Programming
mode
Couple RFID card to
black window
Approval Cell number Enter programming
## # 88
##

Strongly recommended to trace the cards and memory to avoid RFID card trampling

Trace the last memory sell where stored RFID card

Mark the RFID card number with memory cell where card stored