12
C.
Remote Programming from PBX
extension
Some of the data can be programmed through thePBX extension telephone.
i.
Enter extension programming
mode
–
to enter programming mode follow
the next steps
▪
Dial from any telephone to the extension of TadorCodephone.
▪
Press the hash key twice (#, #)(the green led will blink to confirm programming
mode active).
ii.
Exit extension programming mode
–
press twice on the hash key(#, #) or
wait 10 seconds.
1.
Programming speed dial numbers
There are 10 cells in
Tador Codephone
memory to store 10 speed dial numbers.
Cells 41 to 49 are used for speed dial 0 to 9 keys respectively (cell 41
–
1, 42-
2…).
Cell 50 is used to speed dial the 0 key or bell button (
)
.
Example
set the bellkey (
) to fast dial to extension 347.
Enter remote programming mode, enter the cell number 50, followed by the
extension number 347to set for speed dial, and then press (#)Hash key to approve.
Note
–
Asterisk(*) Key will be used for pause.
Hash(#) Dial - (for IP PBX only)
on IP PBX Hashis required at the end of the number.
Example:
Set thebell key (
)to fast dial to extension 347#.
Enter remote programming mode, Enter the cell number 50, followed by the
extension number347# then press *2 and then(#)Hash key to approve
.
2.
Adding two seconds pause on dial
Example:
Whenpressing the bell button (
)
Tador Codephonewill call the
telephoneafter a pause of 2 seconds.
Enter remote programming mode, Enter the cell number 50, enter the number 9 to
get to the external line, press *0 (to get the 2 seconds pause), enter the Telephone
number and # key to approve
.
Exit Programming mode
Approval
Fast dial
Cell number
Programming
Programming code
##(Hash)
#
347
50
##
Call Codephone
Exit Programming
mode
Approval
Insert
hash #)
)
Fast dial
Cell
number
Programming
Programming
code
##(Hash)
#
*2
347
50
##
Call Codephone
Exit Programming
mode
App
Tel
#
Pause
External
line
Cell
number
Programming
Programming
code
