Tadiran Telecom Swift Inverter 9U, Service Manual

Page: 22 / 115

20
• No obstacles between the remote controller and receiver.
• Do not drop or throw the remote controller.
• Do not put the remote controller under the forceful sun rays or heating facilities and
other heating sources.
• Use two 7# batteries, do not use the electric batteries.
• Take the batteries out of remote controller before stop its using for long.
• When the noise of transmitting signal can't be heard indoor
unit or the transmission symbol on the display screen doesn't
flare, batteries need be replaced.
• If reset phenomenon occurs on pressing the button of the remote controller, the
electric quantity is deficient and new batteries need to be substituted.
• The waste battery should be disposed properly.
Note:
* The picture is general remote controller, contains almost all of the function buttons.
They may be slightly different from material abject(depend on model).
* All the figures above are the displays after being initially electrified or re-electrified
after power off. In actual operations, the remote controller screen displays related
items only.
* The cooling only units don’t have the function of heating or electric heating. When
the remote controller turns to such function buttons, the units will not result such
effect. Please don’t turn the remote controller to such buttons.