3
5. With the appropriate cable, insert
the universal-style servo plug into
AnyLink’s INPUT JACK.
Futaba transmitters:
For computer radios which offer the option
to transmit a signal when Tx power is turned ON, make sure “YES”
is selected. Then turn the Tx power switch OFF. Connect the
cable’s square trainer plug to the Tx trainer jack and skip to the
next section.
For use with Futaba 18MZ transmitters, it will be necessary to
make the following settings in the transmitter:
System type:
FASSTest 12CH
Training mode:
student mode, 8ch
JR and Spektrum Transmitters:
Using the JR/Spektrum cable,
connect the “Signal Plug” (similar to a headphone jack) to the
transmitter’s trainer/D.S.C. jack. The transmitter’s logic circuit will
turn on automatically, which is normal. Do NOT connect the Power
Plug to the Tx at this time.
Spektrum’s DX4e, DX5e, DX7s, DX8, and DX10T transmitters
require an optional adapter to function with AnyLink. See your
local hobby retailer for details on Tactic’s AnyLink Power Adapter
(TACM0005).
WARNING!
When not in use, ALWAYS disconnect the
Power Plug from the charge jack BEFORE disconnecting
the Signal Plug from the trainer jack. Failure to do so could
result in a short-circuit condition inside AnyLink and the
Spektrum Tx.
Input Jack
Cable
