16
boz - 216 back panel
The back panel connectors consist of two AC power connectors, INPUT and AUX RS232 con-
nectors, and eight blocks of RS232 and power connectors labeled 1 through 8. These blocks are
referred to as BOZ-216 I/O blocks.
1.
First AC connector. Note that the BOZ-216 has two AC connectors, one on the left side of
the unit and another one on the right side of the unit. This connector provides
filtered AC
power
for the BOZ-2200 modules connected to power connectors 1,2,3 and 4.
2.
Second AC connector. This power entry module provides filtered AC power for the BOZ-
2200 modules connected to power output connectors 4,5,6 and 7.
3.
RS232 connector. This is where your PC, or any other RS232 based controller, should be
connected
4.
RS232 connector. This connector is used to pass RS232 signal connected to (3) to other
units, such as the Tact-2.2 X, Tact TCS, and Tact-2.0 S.
5.
BOZ-216 I/O block #1.
6.
RS232 connector of I/O block #1.
7.
Filtered AC POWER connector of I/O block #1.
8.
BOZ-216 I/O block #2.
9.
RS232 connector of I/O block #2.
10.
Filtered AC POWER connector of I/O block #2.
11.
BOZ-216 I/O block #8.
12.
RS232 connector of I/O block #8.
13.
Filtered AC power connector of I/O block #8.
Each BOZ-2200 module is connected to one of the eight BOZ-216 I/O blocks. The RS232 connec-
tor has to be connected to the BOZ-2200 RS232 connector with the supplied six wire cable. The
POWER connector has to be connected to the POWER connector of BOZ-2200 module with the
supplied cable. For proper operation it is necessary to connect both the RS232 and the POWER
connectors to the corresponding BOZ-2200 connectors.
Note: Only the supplied cables can be used to connect BOZ-2200 modules to the BOZ-216 control
unit.
boz
RS232:
For more communica-
tions information,
please see p. 61.
The first AC Connector
(1) is used for Boz-216
internal logic has to be
connected at all times,
even if I/O blocks 1-4
are not in use.
The second AC Con-
nector (2) has to be
connected if any I/O
Blocks 5-8 are being
used.
The I/O Blocks do not
have to be connected
consecutively. They can
be used in any order
and in any combina-
tion.
216/2200
Summary of Contents for BOZ 216
