TacT Audio BOZ 216, Owner'S Manual

Page: 14 / 68

14
unpacking the
boz 216/2200
Carefully remove the Boz 216/2200 and the accessory kit from the carton and check for shipping
damage. Contact both the shipper and TacT Audio immediately if the unit shows any sign of dam-
age from rough handling. All TacT Audio equipment is carefully inspected before leaving our fac-
tory.
KEEP SHIPPING CARTON AND PACKING MATERIALS for future use or in the unlikely event that the unit
needs servicing. If this unit is shipped without the original packing, damage could occur and void
the warranty.
accessories
You should find the following items in the accessory kit:
- Two AC mains cords
- One RJ11 data cable
- One RJ11-to-RS232 adapter
- One 15’ RS232 cable
- One power cable per BOZ-2200 module
Power cables are the standard 4 feet
Longer cable lengths are available upon request
- One RS232 interconnect cable per BOZ-2200 module
- One remote control
- Two AAA batteries
- One manual
- CD-ROM with software
operating voltage
The Boz 216/2200 amplifier is configured for either 110 or 220/240 volt operation. The operating
voltage is clearly marked on the outside of the box and also on the rear panel next to the AC mains
connector.
BEFORE CONNECTING THE POWER, MAKE SURE THAT THE LABEL INDICATING THE VOLTAGE MATCHES THE
VOLTAGE FOR YOUR COUNTRY
The Boz 216/2200 has three operating modes:
OFF: AC mains power is cut off, either via the front panel mains switch, or by unplugging
the amplifier from the wall outlet.
STANDBY : The unit is powered but all outputs are muted and the display is off. All BOZ-2200
modules are OFF and the BOZ-216 is in “sleep” mode, using very little current while it
is “idling”. Use the remote “STANDBY” button to toggle between ON and STANDBY.
ON: The system is powered and ready to use.
boz
All Tact Audio products
come with a standard
two year warranty.
The Boz 216 control
unit back panel dia-
gram can be found on
p. 16.
216/2200