1
03-20
IMPORTANT
BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
INTRODUCTION
The following instructions contain important information about
the machine and safety advice for the operator. Equipment must
be operated, serviced and maintained in accordance with the
manufacturer’s instructions. If in doubt contact the supplier of
your machine.
Read all instructions before using the
machine
PRODUCT INFORMATION
These commercial floor treatment machines are designed for
the high speed polishing and burnishing of hard floors in indoor
areas. A passive dust control system is supplied as standard with
each model. This machine is for indoor use only. The machine is
intended for commercial use, for example in hotels, schools,
hospitals, factories, shops, offices, rental businesses and other
than normal housekeeping purposes.
TECHNICAL SPECIFICATIONS
Model
Orbis UHS Cordless
Burnisher
Product Code
OCB451500
Charging Voltage AC (~)/
Frequency
V/Hz
100 - 230/50 - 60
Battery Voltage DC
V
24 (2 x 12V)
Battery Details
Ah
44 (C5)
Motor Power
W
480
Run Time
hrs
2
Charge Time
hrs
8
Productivity Rate
m²/h
860
Pad / brush speed
rpm
1500
Pad / brush pressure
g/cm²
3
Pad / brush diameter
cm
43
Sound pressure level
dB(A)
62.1
Dimensions (L x W x H)
with handle
cm
70 x 45 x 86
Weight with batteries
kg
62.5
Weight without batteries
kg
22.5
Warranty
1 year subject to
conditions
Above dimensions are approx. Since the company’s policy
is to continuously improve the product, there could be
changes without prior notice.
Handle vibration does not exceed 2.5 m/s² when operating
on a smooth hard surface.
Noise levels measured at a distance of 1 metre from
machine and 1.6 metres above floor, when operating on a
hard floor. Measurements recorded using a hand held
meter.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(WEEE)
DO NOT
dispose of this device with unsorted
waste. Improper disposal may be harmful to the
environment and human health. Please refer to
your local waste authority for information on
return and collection systems in your area.
IMPORTANT SAFETY ADVICE
The safety information described in this manual provides basic
precautions and supplements standards in force in the country
where the machine is used.
This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury
or death.
WARNING – to reduce the risk of injury,
electric shock or fire.
1.
This machine must only be used for the manufacturer’s
approved application as described in this manual.
2.
The machine must be unpacked and assembled in
accordance with these instructions before connecting to
the electrical supply.
3.
Only genuine accessories and spare parts provided with the
machine or those approved by the manufacturer should be
used.The use of other accessories may impair the safety of
the machine. All repairs must be performed by a qualified
service agent.
4.
DO NOT
modify the machine from its original design.
5.
Operators must be fully trained in the use of the machine in
accordance with these instructions, able to perform regular
user maintenance and the correct selection of accessories.
6.
Operators should be physically capable to manoeuvre,
transport and operate the machine.
7.
Operators should be able to recognise unusual operation of
the machine and report any problems.
EC Declaration of Conformity
Machine Type: Rotary Floor Burnishing Machine
Model: OCB451500…,
This machine is in conformity with the following EU
directives:
Machinery Directive
2006/42/EC
The EMC Directive
2014/30/EU
Applied harmonised standards:
EN60335-1, EN60335-2-29, EN60335-2-67, EN55014-1,
EN55014-2, EN62233, EN610003-2, EN610003-3
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
Malcolm Eneas
Operations Manager
Southampton, 21/08/2018
