4
03-20
RECOMMENDED SPARES & ACCESSORIES
OCB451500
Replacement 12v 44Ah battery for Orbis Cordless Burnisher (2 required)
04-3948-0500
Spray System Kit, inc. mounting bracket & tubing.
05-4156-0000
FAULT DIAGNOSIS
The following simple checks may be performed by the operator. If the machine is still not working, please contact your local Service Agent:
Trouble
Reason
Remedy
No lights illuminated on
charger module
Batteries aren't connected
Connect the batteries
Only red LED on charger
module is illuminated
Fault with charger
Contact service agent
Yellow LED flashing
Battery fault
Contact service agent
Battery not connected
Connect battery
Unsuitable battery
Contact service agent
Machine not working and
charger indicates the
battery is fully charged
Switch interlock incorrectly operated
Check operating procedure instructions
Current overload fuse blown*
Contact service agent
Machine wobbles or
vibrates excessively
Pad worn or damaged
Replace pad
Dirty pad
Clean the pad
Loose pad
Tighten pad locking device
Pad is off centre
Reposition pad
*If the fuse blows several times, the machine should be checked by an authorised Service Agent.
PLEASE REFER TO THE BACK OF THE MANUAL FOR PICTORIAL INSTRUCTIONS
