Truvox International
4
07-14
C
ONDITIONS
1. Claims made under the terms of the guarantee
must be supported by the original invoice/bill of
sale issued at the time of sale, or the machine
Serial No.
2. For claims under this guarantee contact the
supplier from whom you purchased the product
who will arrange the appropriate action. Do not
initially return the product as this could result in
transit damage.
3. Neither Truvox nor its distributor shall be liable for
any incidental or consequential loss.
4. This guarantee is governed by the laws of
England.
5. This guarantee does not cover any of the
following:
•
Periodic
maintenance,
and
repair
or
replacement of parts due to normal wear and
tear.
•
Damage caused by accident, misuse or
neglect, or the fitting of other than genuine
Truvox parts.
•
Defects in other than genuine Truvox parts,
or repairs, modifications or adjustments
performed by other than a Truvox service
engineer or authorised service agent.
•
Costs and risks of transport relating directly
or indirectly to the guarantee of this product.
•
Consumable items such as, brushes, drive
discs, filters and vacuum skirts.
This guarantee does not affect your statutory rights,
or your rights against the supplier arising from their
sales or purchase contract. Truvox International
Limited policy is one of continual product
development and we reserve the right to alter
specifications
without
prior
notice.
Maintenance
WARNING
- Before undertaking maintenance operations or adjustments switch off machine
and unplug from the electricity supply.
The machine requires minimum maintenance apart from the following checks by the operator.
•
Supply cord - Regularly inspect sheath, plug and cord anchorage for damage or loose connection.
•
Body of the machine - Clean with a damp cloth.
•
Air vents - Check for dust accumulation around the air inlet and outlet vents and clean if necessary. Blocked
vents will cause the motor to overheat, and may lead to premature failure. Warranty claims for this type of
damage will not be accepted
•
Motor overload cut-out - All machines are fitted with an automatic reset motor overload cut-out. The cut-out
will operate to protect the motor from overheating by switching the machine off. Should the cut-out operate it
will reset automatically when the motor has cooled sufficiently, usually after 15 - 30 mins.
Fault diagnosis
The following simple checks may be performed by the operator:
* If the fuse blows several times, the machine should be checked by an authorises Service Agent
Trouble
Reason
Remedy
Machine not working
•
Lack of voltage/electrical supply
•
Check fuse *, supply cord, plug and
socket outlet
