background image

 2

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including 
the following:

READ ALL INSTRUCTIONS BEFORE 

USING THIS APPLIANCE

   

  

The manufacturer cannot accept responsibility for damage 
caused when the appliance is not used according to the 
instructions, or for uses other than those for which it 
was intended. 

To reduce the risk of fire, electric shock or injury:

•  Do not leave appliance when plugged in. 

Unplug from outlet when not in use and 

before servicing.

•  

WARNING

: ELECTRIC SHOCK COULD 

OCCUR IF USED OUTDOORS OR ON 

WET SURFACES.

•  Do not allow to be used as a toy. Close 

attention is necessary when used by or 

near children.

•  Use only as described in this manual. 

Use only manufacturer’s recommended 

attachments. 

•  Do not use with damaged cord or plug. If 

appliance is not working as it should, has 

been dropped, damaged, left outdoors, 

or dropped into water, return it to your 

Authorized Retailer for service. 

•  Do not pull or carry by cord, use cord as 

a handle, close a door on the cord, or 

pull cord around sharp edges or corners.  

Do not run appliance over cord. Keep 

cord away from heated surfaces.  

•  Do not unplug by pulling on cord. To 

unplug, grasp the plug, not the cord.

•  Do not handle plug or appliance with wet 

hands.

•  Do not put any object into openings. Do 

not use with any opening blocked; keep 

free of dust, lint, hair and anything that 

may reduce air flow. 

•  Keep hair, loose clothing, fingers and all 

parts of body away from openings and 

moving parts. 

•  Do not pick up anything that is burning 

or smoking, such as cigarettes, matches 

or hot ashes.

•  Do not use without vacuum bag and/or  

filters in place.

• Turn off all controls before unplugging. 

• Use extra care when cleaning on stairs. 

•  Do not use to pick up flammable or  

combustible liquids such as gasoline or 

use in areas where they may be present. 

•  Do not attempt to service the unit while 

appliance is plugged in. 

SAVE THESE INSTRUCTIONS.

WARNING:

Summary of Contents for Riccar RPT-P1

















Reviews: