![background image](http://html1.mh-extra.com/html/tacony/riccar-rpt-p1/riccar-rpt-p1_owners-manual_3177121007.webp)
5
1. Inserting the hose
To begin cleaning, locate a vacuum
port and lift the port lid. Insert the hose
into the port. For models with a power
cord, it is necessary to plug the power
cord into a power outlet.
2. Turning on the power nozzle
The on / off switch is located on the
handle. Press the switch to the left for
vacuum suction only. Press the switch
to the right for vacuum suction and to
activate the power nozzle brush.
To achieve best cleaning results, slowly
pass the power nozzle back and forth
over the carpet or floor.
3. Using the power nozzle
After turning on the power nozzle,
release the handle by pressing the left
pedal on the back side of the power
nozzle (see diagram).
4. Remove / Insert the wand from the
power nozzle
Removing the wand from the power
nozzle allows you to use cleaning tools
for baseboard or ceiling cleaning. To
do this, first turn the power nozzle off.
Then press the wand release collar
(see diagram) and pull the wand out.
To reinsert the wand into the power
nozzle, simply press the wand back
into the neck of the power nozzle. The
wand will then “click” back into place.
5. Adjusting the wand
The telescopic wand is easily
adjustable so you can choose any
wand length necessary for your
cleaning task. Press the wand
extension button and push or pull the
wand to desired length. Collapse the
wand to its shortest height for easy
wand storage.
Operating The Power Nozzle & Accessories
Diagram 5
Diagram 3
Power cord
(select models)