3
Safety instructions
By af
fi
xing the CE mark to the unit the manufacturer declares that the TSL240 conforms to the following relevant safety regulations:
-
EC low voltage directive 2006/95/EC
-
EC electromagnetic compatibility directive 2004/108/EC
Conformity has been veri
fi
ed and the corresponding documentation and the EC declaration of conformity are kept on
fi
le by the manuf-
acturer.
A.1. - EC declaration of conformity
These installation and operating instructions contain basic instructions and important information regarding safety, installa-
tion, commissioning, maintenance and the optimal use of the unit. Therefore these instructions must be read completely and
understood by the installation technician/specialist and by the system user before installation, commissioning and operation of
the unit.
The valid accident prevention regulations, VDE regulations, the regulations of the local power utility, the applicable DIN-EN
standards and the installation and operating instruction of the additional system components must also be observed. The con-
troller does not under any circumstances replace any safety devices to be provided by the customer!
Installation, electrical connection, commissioning and maintenance of the unit may only be carried out by specialists who pos-
sess the appropriate training.
For the user: Make sure that the specialist gives you detailed information on the function and operation of the controller. Always
keep these instructions in the vicinity of the controller.
A.2. - General instructions
Danger
Caution
A.3. - Explanation of symbols
Failure to observe these instructions can result in danger to life from electric voltage.
Danger
Failure to observe these instructions can result in serious damage to health such as scalding, or even
life-threatening injuries.
Caution
Failure to observe these instructions can result in destruction of the unit or the system, or damage to the
environment.
Information which is especially important for the function and optimal use of the unit and the system.
A.4. - Changes to the unit
•
Changes, additions to or conversion of the unit are not permitted without the written permission from the manufacturer
•
It is likewise forbidden to install additional components that have not been tested together with the unit
•
If it becomes clear that safe operation of the unit is no longer possible, for example because of damage to the housing,
then turn the controller off immediately
•
Any parts of the unit or accessories that are not in perfect condition must be exchanged immediately
•
Use only original spare parts and accessories from the manufacturer.
•
Markings made on the unit at the factory must not be altered, removed or made illegible
•
Only the settings actually described in these instructions may be made on the controller
Changes to the unit can compromise the safety and function of the unit or the entire system.
Danger
