Taco FloodBreaker, Installation & Operating Instructions Manual

Page: 7 / 16

4. Using the and buttons adjust the FloodBreaker
to the desired setting. See Table 1 for code key.
Once the LE number is selected press the button to enter
and save the changes.
To temporarily deactivate the standard leakage protection, follow
the instructions in 5.2 and select the -- leak setting shown in
Figure 6. After saving and returning to the home screen, “0” will
be displayed during the deactivation period.
During periods when the house may be unoccupied a tighter leak
protection may be desired. This can be accomplished using the
vacation leak mode and does not require changing the normal
leak protection setting. When activated it overrides the standard
leak protection.
The vacation leak protection is adjustable from 3-26 gallons of
uninterrupted flow. If the vacation leak setting is exceeded a leak
is suspected, the FloodBreaker closes thus shutting off the water
and the Message A5 is displayed.
1. Unlock the Keyboard. Press the button until reach-
ing the UL menu (Figure 7).
2. Press the button once more to reach the adjusting
screen. Set the desired value by using the and
buttons (Figure 8). See Table 2 for the code Key.
3. Press the button again to save.
7
Table 1
LE Standard
Protection Setting
Approximate
Gallons
– – Deactivated
1 25
2 55
3 80
4 105
5 130
6 160
7 185
8 210
9 240
10 265
11 290
12 315
13 345
14 370
15 395
Note: Anytime a program change is made press the
button after the change to enter and save the change.
5.3 Temporarily deactivating the
standard leak protection
Figure 6
Note: The standard leak protection mode is automatically
reactivated after 8 hours.
5.4 Vacation leak protection
5.5 Setting the vacation leak
protection
Figure 7
Figure 8