background image

SET - UP

Aligning the pickup tube (Fig. B)

The pickup tube(#15) needs to be aligned in the direction toward the front of the canister
( Fig. B). This will ensure you spray as much material aspossible before you need to refill.

Make sure the pickup tube is assembled tight in place.

Attaching spray unit to spray gun handle (Fig. B1)

Align the marking line on the spray unit with the icon of unlock, then rotate the spray gun 
handle clockwise until stop. Rotate the quick release lock (#20) and snap onto the hook on 
the edge of canister lid.

Assemble the universal wheels (Fig. C)

Snap the universal wheels onto the 4 openings at the bottom side of the power unit 

Note:

 Assemble 2 universal wheels with lock (#28) at the front side, and 2 universal 

wheels without lock (#29) at the back side.

Attaching the air hose (Fig. D1, Fig. D2)

► Insert one end of the air hose into the hose connector of the back of the sprayer. A slight 

twisting action when inserting the hose will help insure a snug fit. ( Fig. D1)
Insert the other end of the air hose into the hose connector of the front of the power unit. A 
slight twisting action when inserting the hose will help insure a snug fit. (Fig. D2)

16. Check valve assembly
     16.1 Check valve sleeve 1
     16.2 Check valve
     16.3 Spring
     16.4 Check valve sleeve 2
     16.5 Valve extension
17. Canister
18. Trigger
19. Flow control knob
20. Quick release lock
21. Telescopic tube handle grip
22. Telescopic tube lock on/off
23. Sprayer dock
24. Filtercover

25. Filter
26. On / off switch
27. Filter
28.Universal wheels with lock
29. Universal wheels without lock
30. Filter 2
31. Air ventilation cover
32. Air hose
33. Viscosity cup
34. Cleaning needle
35. Cleaning brush
36. Spray tip key
37. Spray width lever for 1.0mm nozzle.

Warning! 

Be sure to use appropriate protective gear and unplug unit.

Warning! 

Make sure area is well ventilated and free of flammable vapors.

- 14 -

Summary of Contents for SGP17AC

























Reviews: