ELECTRICAL SAFETY
Before using the spray gun or after replacing the nozzle, pay attention to check whether the
seal ring is put in palce; The seal ring should be carefully stored to avoid loss; The spray gun
is forbidden to be used without the seal ring.
► If the supply cord is damaged, it must be replaced by the manufacturer or an authorized
Service Center in order to avoid a hazard.
► When using the tool outdoors, only use extension cables intended for outdoor use. A
suitable rate dextension cable of up to 30 m can be used without loss of power.
► Electric safety can be further improved by using a high sensitivity.
EXTENSION CORD
3-blade grounding plug and a 3-slot receptacle that will accept the plug on the product. Make
sure your extension cord is in good condition. When using an extension cord, be sure to use
one heavy enough to carry the current your product will draw. An undersized cord will cause
a drop in line voltage resulting in loss of power and overheating. If an extension cord is to
beused outdoors, it must be marked with the suffix W-A after the cord type designation. For
example, a designation of SJTW-A would indicate that the cord would be appropriate for
outdoor use. For proper size cords see chart.
Guide for extension cord usage:
FEATURES (Fig. A, Fig. A1, Fig. A2 )
1. Sprayer
2. Power unit
3. Smart nozzle selector
4. Tip collar
5. Air cap
6. Nozzle (Φ2.0mm/Φ2.5mm/Φ1.0mm)
7. Y-type seal ring
8. Spray width lever
Type of cable
Paralel
Up to 5 metres
2x 1,0 mm
2
from 5 to 10 metres
2x 1,5 mm
2
This tool is double insulated; therefore no earth wire is required. Always check that
the power supply corresponds to the voltage on the rating plate.
Warning!
Some spray materials contain chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm. To reduce your exposure,
please wear appropriate safety equipment such as face masks, gloves,and other
appropriate protective equipment. Please review and follow the safety precautions
on the paint container.
9. Spray tip
10. Spray unit housing
11. Spray gun handle
12. Quick refill lid
13. Sealing linear
14. O-ring
15. Pickup tube
- 13 -
Summary of Contents for SGP17AC
