1 (8)
0-003-2063-2 (EN)
Subject to modification.
M800 is an electro-mechanical actuator for the control of
two-way and three-way plug valves in:
•
domestic hot water systems
•
heating systems
•
air handling systems
M800 is either controlled by an increase/decrease signal
or by a modulating 2–10 V control signal. Modulating
control makes for a faster positioning of the actuator.
The electronic circuitry of the actuator ensures that the
running time is the same, regardless of the stroke of the
valve in question.
It is easy to mount and connect the actuator. It can be
mounted directly onto TAC’s control valves, without any
mounting kit.
The working range of the actuator is adjusted
automatically depending on the stroke of the valve. The
electronic circuitry of the actuator then takes care of the
adjustment of the valve end positions.
The actuator is supplied by 24 V AC. It can provide
16 V DC voltage supply for older TAC controllers.
Actuator for valves
G-40-36
11 Jan 2005
TECHNICAL DATA, M800
Part numbers ....................... see the table on the next page
Supply voltage .................. 24 V AC +10%/ -40%, 50–60 Hz
Power consumption ...................................... average 15 VA
Transformer sizing ...................................................... 50 VA
Running time:
Modulating 10–25 mm (0.39 - 1 in.) ........................... 15 s
Modulating 25–32 mm (1 - 1.26 in.) ........................... 20 s
Modulating 10–52 mm (0.39 - 2.05 in.) ...................... 30 s
Increase/decrease ............................................ 300 s/60 s
Close off time with STS, at power failure:
Stroke 10–25 mm (0.39 - 1 in.) ......................... max. 20 s
Stroke 25–32 mm (1 - 1.26 in.) ......................... max. 25 s
Stroke 32–52 mm (1.26 - 2 in.) ......................... max. 35 s
Stroke ............................................. 10–52 mm (0.39 - 2 in.)
Factory set stroke ................................... 41 mm (1.61 in.)
Thrust .......................................................... 800 N (180 lbf.)
Duty cycle .......................................... max. 20%/60 minutes
Analog input:
Voltage .................................................................. 0–10 V
Impedance ..................................................... min 100 k
Ω
Digital inputs VH–VC:
Voltage across open input .................................. 24 V AC
Current through closed input .................................... 5 mA
Pulse time ....................................................... min. 20 ms
Output G1:
Voltage ..................................................... 16 V DC ±0.3 V
Load ......................................... 25 mA, short-circuit proof
Output Y:
Voltage ................................................... 2-10 V (0-100%)
Load ......................................................................... 2 mA
Ambient temperature:
Operation ............................ –10 – +50 °C (14°F - 122°F)
Storage ................................ –10 – +50 °C (14°F - 122°F)
Ambient humidity ............................................ max. 90% RH
Enclosure rating ........................................................... IP 54
Sound power level ........................................... max. 40 dBA
Standards:
Emission ............................................... EN 50081-1:1992
Immunity ............................................... EN 50082-1:1992
Heat ................................................................. IEC-68-2-2
Humidity .......................................................... IEC-68-2-3
Cold ................................................................. IEC-68-2-1
Vibration .......................................................... IEC-68-2-6
Material:
Housing ............................................................ aluminium
Cover ........................................................ ABS/PC plastic
Color ........................................................... aluminium/black
Weight ......................................................... 1.8 kg (3.96 lb.)
Dimensions (mm) .......... refer to the table on the next page
TAC Forta M800
