Model 1700 / 1750 Rotary Platform Abraser
14
Operating Instructions ver. 1.0
p/n 135505
TABLE 1
Wheel Status
Refacing Cycles
New
2 refacings of 50 cycles
Used (previous test
<1,000 cycles)
25 cycles
Used (previous test
>1,000 cycles)
50 cycles
* During Test
25 cycles
The below screen shot shows a test with a PAUSE
INTERVAL set for 200 cycles. To resurface the
wheels, remove the specimen and mount the
appropriate refacing medium (adjust vacuum
nozzle if necessary). Press the Reface button to
commence refacing. Once the reface is complete,
remove the refacing medium and mount the test
specimen. Select CONTINUE to continue testing or
REFACE to perform a second refacing.
NOTE:
The S-11 refacing disc is used only once for a
maximum of 50 cycles. Never reface wheels with a used
S-11 refacing disc. Otherwise, the wear coefficient of the
wheel faces may change and inject an error in the test
results.
NOTE:
Wheels that have not been used for a long period
of time may require two break-in refacings like a new set
of wheels.
NOTE:
When refacing CS-10F wheels, adjust the
vacuum pick-up nozzle to 0.80 mm
– 1.60 mm above the
ST-11 refacing stone.
NOTE:
The useful life of the ST-11 refacing disc is 7,500
cycles per side (approximately 300 refacings per side).
NOTE:
Refacing cycles are not added to the cumulative
number of test cycles.