Fit the rudder by first removing the rudder hinge pin. Line up the pre-installed hinges and then slide
the pin through them. Remove the grub screw from the small collet, add a drop of blue threadlok to
it, reinsert it and then attach the collet to the end of the hinge pin.
Now the rudder is installed, secure the counterbalance of the rudder to the top of the fin so that it
cannot move.
Tip: - Masking tape can be used to effectively hold the rudder in place whilst you attach the pull/pull
assemblies to the rudder horns.
Take the ends of the pull/pull cable and make up the assembly as per the servo end, but use the
horn end ball links.
34
Summary of Contents for TS 120CC Edge
Page 1: ...Instruction Manual for TS 120CC Slick Edge Extra...
Page 5: ...3...
