On the rudder, locate the slots for the horns and carefully cut the covering away to expose the slot.
Tip: - Hold a torch, or bright light to the other side of the rudder while you look for the slots… the light
will illuminate through the covering.
Once you have cut the slots, use your iron to seal the covering down onto the wood.
Now dry fit the horns and back plates, and as we did with the elevator and wing horns, draw around
the back plate and then carefully cut 2mm inside the line to expose the wood beneath the covering.
Clean up the covering with alcohol.
28
Summary of Contents for TS 120CC Edge
Page 1: ...Instruction Manual for TS 120CC Slick Edge Extra...
Page 5: ...3...
