PROGRAMMABLE PARAMETERS & EXPLANATIONS
1. Flight Model
1.1 Fixed wing
: suitable for fixed wing flight &multi-rotors aircraft,in the mode,the motor
only starts up when the throttle amount reaches 5% or above, quick throttle response.
1.2. Helicopter (Linear Throttle/External Governor)
: this model is applicable to
helicopters which do not use any kind of speed-governing devices or helicopter which
use external governors. If you select this mode, the “response time” will turn to soft start-
up enable/disable. and it will run in either way as below:
1) when setting to “soft start-up enable” (with the response time is set to any value
between 1 to 21), then the motor will start up in a soft way and then quickly accelerate to
speed corresponds to the current throttle amount after the soft start up completes.
2) when setting to “soft start-up enable” (with the response time is set to 0), then the
motor will respond to throttle input rapidly.
2. LiPo Cells
Both auto & manual calculation available. The ESC will automatically calculate the number
of LiPo cells you have plugged in as per the “3.7V/Cell” rule if “Auto Calc.” is selected; and
we recommend setting this item manually when you’re using a LiFe or LiHV battery, if the
Parameters
Value
Flight mode
Lipo cells
Voltage cutoff model
Response Time
Auto Restart Time
Brake Type
Brake Force
Timing
Motor Rotation
DEO Start up
Start-up Force
Fix wing
Soft cutoff
Turn off
0~21
0~9
0~9
0s~90s
1s~3s
N/A
0~100%
0°~30°
CW
ON
1~7
6~14S
Hard cutoff
2.8V~3.8V
Normal
CCW
OFF
Fix wing
Soft cutoff
Turn off
2
4
5
25s
1s
N/A
0%
18°
CW
ON
7
Pro
-portional
12
13
14
15
low voltage
protection value
Governor
Parameter P
Governor
Parameter I
Restart
Acceleration Time
Auto
calculation
Helicopter
external governor
Factory default
parameter
Auto
calculation
