Step by Step
Making Calls – Convenience Functions
52
Transferring a Call after a Speaker Call
(Announcement) in a Group
If this function has been configured (contact your service personnel),
you can use a speaker call (announcement,
Æ
page 42) to an-
nounce a call in progress to a group of users
Æ
page 83.
After a member of the group has accepted the call request, you can
transfer the waiting party.
Precondition: You are conducting a call.
:
Confirm. The other party is placed on hold.
Press the key. The LED lights up.
>
:
Select and confirm.
or
qld
Enter the code.
o
Enter the group’s station number.
s
Announce the call.
When a member of the group accepts the call
Æ
page 30, you are
connected to this party.
t
Replace the handset.
or
>
:
Select and confirm
1
.
Trunk Flash
To activate ISDN-type services and features through the network car-
rier’s analog trunks or those of other communications platforms
(such as "consultation hold"), you must send a signal to the trunks be-
fore dialing the service code or telephone number.
Precondition: You have set up an external connection.
Press the key. The LED lights up.
>
:
Select and confirm
1
.
or
qie
Enter the code.
o
Enter the service code and/or telephone number.
Consult?
Program/Service
*
80=Speaker call?
Transfer?
[1] ”Different Displays (Octopus F900 Environment)”
Æ
Page 104
If the connection between the two other parties is not estab-
lished within 45 seconds, the call from the first part returns to
you (recall).
Program/Service
*
51=Trunk flash?