T-Mobile Octophon F key module Operating Instructions Manual Download Page 80

Page: 80 / 122

Step by Step

Using Other Functions

Communicating with PC Applications
over a CSTA Interface

If this function has been configured (ask your service personnel), you

can use your telephone to communicate with PC applications (CSTA

= Computer Supported Telecommunications Applications). You

send information to the application and receive information from the

application, for example, on your telephone's display.

qhmh

Enter the code.

Press the "Data I/O Service" key.

(configuring keys

Page 55).

Enter the three-digit ID for the application you want to operate.

...

Use the relevant keys to communicate with the application.

Temporarily interrupting communication with the application:

The telephone rings. You accept the call.

The "Data I/O Service" key flashes: communication with the applica-

tion was automatically interrupted.

Resuming communication with the application:

Press the flashing "Data I/O Service" key. The LED lights up.

Ending communication with the application:

Select and confirm the appropriate CSTA message.

Lift and replace the handset.

Summary of Contents for Octophon F key module



























































































































Search results

Summary of Contents for Octophon F key module

Reviews:

Related manuals for Octophon F key module

Brands by name

Popular brands

T-Mobile Octophon F key module, Operating Instructions Manual

Search results

Summary of Contents for Octophon F key module

Reviews:

Related manuals for Octophon F key module

Brands by name

Popular brands