DIGITAL TIMER INSTRUCTIONS
INSTALLING THE BATTERY
1. The battery can
ONLY
be installed in one direction. Open up the battery
compartment by pressing your thumb on the ribbed area and at the same time
sliding the lid away from the trigger. Fig.1
2. Look inside the battery compartment and you will see an
image
of a 9V battery
with a
+
symbol
beside the correct battery positive contact and a
–
symbol
beside the negative contact. Orient your battery so that the symbols match the
compartment diagram. Fig.2
Fig.1
Fig.2
SETTING THE CURRENT DAY AND TIME
1. I suggest users
RESET
their triggers prior to each programming for a new launch
to clear past launch program
On/Off
times. Using a toothpick, insert it into the
RST
hole and press until the clock resets to 12:00 then proceed to step 2.
2. To set current day and time, press and hold
“Time Set”
. While holding the
Time
Set
button, press
DAY
to set the current day, press
HR
to set the current hour and
press
MIN
to set the current minute.
