Subject to modifications.
© Vestamatic GmbH
Art.-Nr.: 85601521 F2 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
Time Control Easy
1/2
G
Time Control Easy
Art.-no.:
01813335
Installation and Operating Instructions
Time Control Easy
Art.-no.: 01813335
Shutter control for manual or automatic control
of electric shutters or lighting control.
Short description
Easy operation with up/down arrow buttons and display
Week and day program
Random function
Safety precautions
Ä
– Contact a professional electrician to install the control sys-
tem, because the control system requires a power supply of
230VAC, 50 Hz.
– Check the control system for signs of mechanical damage after
unpacking. If you notice any shipping damage, do not start up
the control system and notify your supplier immediately.
– The control system should only be used for the purpose speci–
fied by the manufacturer (refer to the operating instructions).
Any changes or modifications thereof are not permissible and
will result in loss of all warranty claims.
– If the control unit or the connected sunshade cannot be oper-
ated without presenting a hazard, it must be switched off and
prevented from being switched on unintentionally.
– When performing work on the windows, controls or connected
shades, protect them against unauthorised or unintentional
operation.
Technical data
Power supply:
230VAC, 50 Hz, +/-10%
Impulse voltage withstand level: 2.5 kV
Rated power:
< 1.5 W
Output (Up/Down):
230VAC, 50 Hz
Maximum load:
250VAC, 3A, cos
f
> 0.8 ind.
Align switching time:
180 seconds
Software class:
A
Operating temperature:
0 °C (32 °F) to +60 °C (140 °F)
Protection degree:
IP 20
Battery backup:
60 minutes
Dimensions (L × W × H):
80 × 80 × 45 mm, Installation in
flush-mounted boxes 60 mm Ø
at least 42 mm deep / recom. 60 mm
Colour information:
similar to RAL 9016
Conformity:
p
Disposal of waste
The disposal of electrical equipment and batteries in household waste
is strictly forbidden.
É
The symbol (dustbin crossed out, in line with WEEE Appendix IV) in-
dicates separate collection of electrical and electronic products in EU
countries. Do not dispose of the device or battery in your household
waste. Ask your town or local council about the return and collection
systems available in your area to dispose of this product.
Assembly and installation
Ä
WARNING!
Risk of injury due to improper installation and commissioning.
Improper installation and commissioning may lead to personal
injury or property damage.
Therefore:
– When connecting the device, observe the currently valid VDE
standards (in particular DIN VDE 0100/0700), your local power
company’s regulations and the current accident prevention regu-
lations.
– Connect the control in accordance with the wiring diagram.
Notes for professional electricians
1. In any case ensure that the safety regulations according to DIN VDE 0105.
2. Connect the device according to the wiring diagram and attach supporting
frame to the junction box or cavity wall box.
3. Fit the device through the cover by applying gentle pressure onto the
supporting frame.
4. Switch on the power supply.
5. Check the sunshade direction by using the “Up” and “Down” buttons.
Wiring diagram
