SETTING ON / OFF PROGRAMS
1. Press
“PRG”
once
2.
1 ON
will appear in the LCD window with an image of a light bulb to the right of
the LCD screen..
3. Press
“DAY”
and
MON 12:00 a.m.
will appear
4. Press
“DAY”
again and it will advance to the next day of the week
(Mon – Sun)
each time you press it. As you keep pressing
“Day
”, you have the choice of
having the trigger turn on each individual day, every weekday
MON thru FRI
,
weekends
SAT
and
SUN
, or every day
MON
thru
SUN
. Seasoned Space Shuttle
remote photographers like these choices if there are scrubs so they do not have to
go out to reset their timers every day after a launch scrub. If your camera’s are not
well protected I recommend going out for a camera reset to check for moisture.
5. If you do not touch a button while in
“PR” program mode
for
15 seconds
the
timer automatically reverts back to the current time of the day.
6. While still in
PRG 1 ON
press the
HOUR
and
MIN
to set the exact time you
want the trigger to turn on.
7. After setting the
PRG 1 ON time
, Press
PRG
a second time. You will now see
1
OFF
. You will also see an image of a light bulb in a circle with a slash through it
to the right of the LCD time. This is the time you want the trigger to turn
OFF
.
Press the appropriate
DAY, HR and MIN buttons
to set the
1 OFF
time.
8. Now Press
Time Set
once and you will
exit
your
PROGRAM mode
. The
current day and time should be seen in the
DISPLAY
with
OFF
in the lower left.
9. The digital timer has
14 ON and OFF PROGRAMS
if you choose to use them.
10. If you want to set advance days of launch windows,
press “PR”,
set Prg.1 on day
and time, press “PR” again, set the 2 ON day and time, press “PR” again, set the 3
ON day and time, etc. After you’ve set your multi days ON time you can go back
to Program 1 and press the Grey button to show and set your off time for Prg.1.
Then press “PR” to show Prg. 2 ON, press the grey button to show and set Prg. 2
OFF, etc.
Always
look for the
PRG. 1-14 number
and the
Image of the light
bulb
in the LCD screen which tells you if you’re setting the PRG to either turn
the trigger ON or OFF.
USING THE PROGRAM(S) YOU SET
1. Now that you set an
ON and OFF program
and you want to use it.
2. Plug your remote trigger cord into the trigger plug.
3. Set your camera to all of your manual settings and plug the trigger cord into your
camera.
