Translation of the Original Operating Instructions
6
Light status when the pump start initial operation
No.
Press on/off
button on
the pump
Description
Power light
Red light
Green light
Blue light
Remarks
8.3.1
No
Operation
No power
8.3.2
Plug in
Power on
(1s)
(1s)
(1s)
After 1 s, only
power light on
8.3.3
Press button
by hand
On
8.3.4
Press button
by hand
off
8.4.
Connecting to network:
-
It is necessary to download and install APP before use. Open the APP and turn on the WIFI and Bluetooth
functions of the mobile phone.
-
Connect the pump to the power supply and turn on the pump, search the device in the APP and complete the
connection according to the APP instruction.
To do this, press the On/Off button for 3 seconds to activate the network connection mode, the network
connection standby time is about 3 minutes.
-
After the network connection is successfully established, the green light in display 1 will turn on pulsating.
The on/off and timer functions are available on the APP, and the working current, operating voltage and
cumulative operating time of the pump can be obtained on the APP.
-
If the network connection is not successfully completed within 3 minutes, the connection mode will be
automatically activated for a second cycle. If no network connection can be established, the pump switches
to error mode, this is signaled by alternating red and blue flashing of display 1.
Network connection
No.
Description
Power light
Red light
Green
light
Blue light
WIFI/
Bluetooth
Remarks
8.4.1
Switch on the pump
before the network
connection.
WIFI or
Bluetooth
connection
Bluetooth must be
turned on to
establish network
connection
8.4.2
Press the On/Off
button for 3 seconds
Bluetooth must be
turned on to
establish network
connection
8.4.3
Network connection
successful
In normal operating
mode
8.4.4
Network connection
failure
6 m
3 m
Continue with the
second network
connection. If the
connection fails, the
red indicator will
change to slow
blinking to indicate
the connection
error.
8.5.
Pump operation after the network connection:
-
Press the on/off key of the pump. Display as shown at 8.5.1
-
Call up the designated APP and switch the pump on and off by pressing the switch button on the APP.
Illumination as shown at 8.5.2 and 8.5.3.
-
Set on/off time Through the APP, the pump will automatically operate at the set time. Lighting as in 8.5.4 &
8.5.5.
18
