18
• If you use solid fat, chop it into pieces and then melt it
in a separate pan before pouring it into the bowl (never
melt solid fat in the basket or in the bowl).
• Never exceed 302°F/150°C to melt the fat that has so-
lidified in the bowl. For the cooking temperature follow
the instructions (see cooking charts
p.20
).
• NEVER use animal fat such as lard or dripping as this
could cause overflowing, smoke or a fire hazard.
Pre-heating
• After filling the bowl with the fat, close the lid and plug
in your fryer without the basket.
• The indicator will light up -
fig 9.
• Adjust the thermostat -
fig 8
depending on the food to
be fried (see cooking charts
p. 20
).
• When the temperature indicator switches off, press
the lid unlock button to open the lid and allow the
steam to escape.
Loading the basket
• Dry the food to remove any excess water or ice.
• Fill the basket before placing it in the fryer.
• Do not overfill the basket.
• Reduce quantities for frozen food.
• Tip: Cut food to the same sized pieces so that it cooks
evenly. Avoid pieces that are too thick.
Cooking
Lowering the basket
• After the temperature indicator light goes out, very
gently lower the basket into the oil
- fig 11
. Lowering it
too quickly could cause the fryer to overflow
-
Wait for
one minute with the lid open -
fig 12
then close the lid
- fig 12a.
Place the fryer:
- on a secure surface
- out of the reach of
children
- away from any
sources of water,
splashes or heat.
Never plug the fryer in
when it is empty
(without any oil or fat)
- fig 10.
Never exceed the
maximum safety limit
– fresh products 800 g,
frozen 750 g. To avoid
overflowing and extend
the life of the oil, dry
the food carefully
TF_FRYERS_MAXYFRY_NC00133675.qxp_Mise en page 1 24/03/2016 17:11 Page18
