background image

DRYER USER INSTRUCTIONS

Assistance or Service

If you need assistance or service, first see the “Troubleshooting” 
section. Additional help is available by calling our Customer 
eXperience Center at 1-800-253-1301 from anywhere in the 
U.S.A., or write:

Whirlpool Corporation

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.
To order parts and accessories, call 1-800-442-9991.

Keep this book and your sales slip together for future 
reference. You must provide proof of purchase or installation 
date for in-warranty service.

Write down the following information about your appliance to help 
you obtain assistance or service if you ever need it. You will need 
to know your complete model number and serial number. You can 
find this information on the model and serial number label, located 
at the top inside dryer door well.

Dealer name____________________________________________________

Serial number __________________________________________________

Address ________________________________________________________

Phone number __________________________________________________

Model number __________________________________________________

Purchase date __________________________________________________

Table of Contents

ASSISTANCE OR SERVICE............................. 1

DRYER SAFETY ............................................... 2

DRYER USE ...................................................... 4

DRYER CARE ................................................... 5

TROUBLESHOOTING ...................................... 6

WARRANTY ...................................................... 8

®

8574879

Summary of Contents for Inglis IES5000RQ0









Reviews: