background image

INGLIS BY WHIRLPOOL CORPORATION™ DRYER WARRANTY

ONE-YEAR FULL WARRANTY

For one year from the date of purchase, when this dryer is operated and maintained according to instructions attached to or furnished 
with the product, Whirlpool Corporation will pay for FSP

®

 replacement parts

 

and repair labor costs to correct defects in materials or 

workmanship. Service must be provided by a Whirlpool designated service company.

Whirlpool Corporation will not pay for:

1. Service calls to correct the installation of your dryer, including venting. Heavy 4" (10.2 cm) metal exhaust vent must be used. Refer 

to the venting section of this manual and your Installation Instructions.

2. Service calls to instruct you how to use your dryer, to replace house fuses or correct house wiring or reset circuit breakers, or to 

replace owner accessible light bulbs.

3. Repairs when your dryer is used in other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, floods, acts of God, improper installation (including, but not limited 

to, venting with plastic or flexible foil), installation not in accordance with local electrical and plumbing codes, or use of products not 
approved by Whirlpool Corporation.

5. Replacement parts or repair labor costs for units operated outside the United States. 

6. Pickup and delivery. This product is designed to be repaired in the home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not 
apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Outside the 50 United States, this warranty does not apply. Contact your dealer to determine if another warranty applies.       

2/05

Replacement parts

If you need to order replacement parts, we recommend that you 
only use FSP

®

 replacement parts. These parts will fit right and 

work right because they are made with the same precision used 
to build every new INGLIS BY WHIRLPOOL CORPORATION™ 
appliance.

To locate FSP

®

 replacement parts in your area:

Call the Customer eXperience Center at 1-800-253-1301, or your 
nearest designated service center.

For information on how to contact Whirlpool Corporation, please 
see front page of this document.

8574879

© 2005 Whirlpool Corporation.
All rights reserved.

® Registered Trademark/TM Trademark of Whirlpool, U.S.A.

2/05

Printed in U.S.A.

Summary of Contents for Inglis IES5000RQ0









Reviews: