T E E F O R M I N G M A C H I N E
T-60
moving parts, binding of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard or other part
that is damaged should be properly repaired or replaced by an authorised
service unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by an authorised service. Do not use
tool if switch will not turn it on and off.
Have your tool repaired only by T-DRILL
– This electric tool is in
accordance with the relevant safety requirements. Repairs should be
carried out only by certified persons using original spare parts; otherwise,
this may result in considerable danger to the user.
Keep tools away from items that may be damaged by magnets
– The
motor contains a powerful magnet that may damage magnetic tape, credit
cards, computer disks and watches.
Use ear protectors.
During operation the noise level of the collaring
machine may exceed 95dB(A).
The vibration excercised on the operator's hand is less than 2.5m/s.
9
