I N S T R U C T I O N M A N U A L
3.3 Information about Accessories
For proper use of T-DRILL T-60 the following accessories are available:
Notcher ND-54
Tube end notcher forms the end of branch pipe to match inner curve of the
run tube. In this way maximum flow is achieved. The notcher also presses
two dimples simultaneously in the end of the branch tube, one acting as a
depth stop and the other one for inspection of the joint after brazing.
Gauge Block and rings
Correct size settings of the T-DRILL head for various tube sizes can easily
be checked with the gauge block. The range of size is NS 1/4"-1" with the
gauge block; 1¼”, 1½” and 2” with the rings).
Counter Plate
The counter plate assists forming of the outlet and improves the quality of
the outlet by supporting the tee forming machine against the run tube. The
counter plate is used for run tube sizes from NS 2 ½” (66.7 mm) to 4” (108
mm).
Lubrication for copper
A bottle of lubricant to be used for forming the outlet in copper tube, is
included.
12
