t.amp S- 75 Owner'S Manual Download Page 3

Page 3

U

ser

 M

anUal

These instructions do not provide all information regarding the device's design, production or possible 

modifications. It also does not cover every possible situation that can occur during installation, opera

-

tion or maintenance. If you should require special assistance that is not covered by the information 

given here please contact our technical support department.

   

  

 

  

PAY PARTICULAR ATTENTION TO THESE SYMBOLS:

This sybol, wherever it appears, warns of uninsulated power sources 

DANGEROUS 

VOLTAGE

 inside the device so that a 

LIFE THREATENING

 situation from electrical 

shock exists!

This symbol, wherever it appears, reminds you of SAFETY RELEVENT paragraphs of 

these instructions and/or accompanying documents. Therefore READ THESE  

INSTRUCTIONS!

1. Introduction 

Congratulations on the purchase of your power amplifier. Your choice shows that you enjoy excellent 

sound reproduction. We are pleased by your purchase and are proud of the long tradition of quality, 

high-class devices for which our company stands.

In order to get the best out of your amplifier you should read the entire instructions 

before

 you con-

nect and put it into operation. The instructions will acquaint you with all the necessary information 

for connection and operation so that your audience will listen with great pleasure from the start.

Thereby you will ascertain our efforts, during the design and production stages of the device, to 

fulfill your wishes and expectations regarding ease of use and adaptability.

Please keep these instructions for future reference.

Make a note of the device's serial number, located on the rear panel, here in the instructions. 

Should you contact your dealer regarding further information or service for this device you will be 

able to supply him/her with the model and serial numbers even when the device is mounted in the 

rack.

MODEL__________________   Serial number__________________

FOR YOUR SAFETY YOU MUST READ THE CHAPTER "SAFETY INFORMATION" IN ANY 

CASE.

Summary of Contents for S- 75













Reviews: