background image

4/22/2022 

3  

Solitaire T FCC Safety Instructions_EN_

修改版

_2022.04.12.Docx 

REGULATORY COMPLIANCE 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver.  
 
Connect the equipment into an outlet on a circuit different from that to which the  receiver is connected.  
 
Consult an experienced radio/TV technician for help. Changes  or modifications not expressly approved by 

T+A

 could void 

the user’s authority to operate this equipment. 

 

 
This device complies with part 15 of the FCC Rules and with Industry Canada license-ex-empt RSS standard(s). Operation is 
subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept 
any interference received, including interference that may cause undesired operation.  
 
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not 
be co-located or be operating in conjunction with any other antennas or transmitters.  
 
FCC ID:  
Model: Solitaire T 
 
Management Regulation for Low-power Radio-frequency Devices  
 
Article XII   

According to “Management Regulation for Low

-power Radio-frequency De- 

vices” without permission granted by the NCC, 

any company, enterprise, or  user is not allowed to change frequency, enhance transmitting power, or alter  original 
characteristic as well as performance to an approved low power radio-  frequency devices.  
 
Article XIV   
The low power radio-frequency devices shall not influence aircraft security  and interfere legal communications; if found, 
the user shall cease operating  immediately until no interference is achieved. The said legal communications  means radio 
communications operated in compliance with the Telecommunications Act.  
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio 
wave radiated devices.  
 
T+A elektroakustik GmbH & Co. KG hereby declares that this product is in compliance with the essential requirements and 
other relevant provisions of Directive 2014/53/ EU and all other applicable EU directive requirements.   
 
The complete declaration of conformity can be found at:   

https://www.ta-hifi.de/support/declaration-of-conformity/

 

 
For Europe: Frequency band of operation 2400 to 2483.5 MHz: 
Bluetooth: Maximum transmit power less than 20 dBm EIRP.  
Bluetooth Low Energy: Maximum power spectral density less  than 10 dBm/MHz EIRP.  
 

DON’T attempt to remove the rechargeable lithium

-ion battery from this product. For the exchange, contact 

T+A

 Service 

(

[email protected]

) or a qualified specialist. 

 

Please dispose of used batteries properly, following local regulations. Do not incinerate

 

This symbol means the product must not be discarded as household waste  and  should  be  delivered  to  an  appropriate  
collection  facility  for  recycling. Proper disposal and recycling help protect natural resources, human health  and the 
environment. For more information on disposal and recycling of this  product, contact your local municipality, disposal 
service, or the shop where  you bought this product. Removal of the rechargeable lithium-ion battery in  this product 
should be conducted only by a qualified professional.  
 
 

Summary of Contents for Solitaire T













Reviews: