T+A SADV 1250 R HD, User Manual

Page: 8 / 42

8

 

   
A short press on this button switches the unit to Pause /
static picture . Press the

 

-button to resume
playback.
During DVD playback repeated short presses of the
    button move on to the next single frame of the
film.
Repeated long presses (around 2 seconds) during DVD
playback switch to different slow motion speeds. Press
the

 

-button to stop slow motion.
   
   
The     button ends playback.

 

   
A short press on this button starts playback, or resumes
playback after a
Pause .

 

Screen window
All the screen elements of the SADV 1250 R HD are
displayed in a clearly laid-out window on the integral
screen:
1 / 2 / 3 This display area shows the currently active
oversampling algorithm (1...3). If none of the
numbers are lit, the standard algorithm (FIR
Filter) is active.
CD
is lit if a standard audio CD or the CD layer
of a hybrid disc is played
SACD
is lit when a SACD is played
MCH
is lit if a multichannel track is played

This indicator is lit, if the analog output of
the
SADV 1250 R HD is switched to high
bandwidth (WIDE-mode).
P indicates that the P-scan mode (progressive
scan) is active for the YUV component video
output

this indicator is leit, if the video output is
switched OFF (pure high quality AUDIO-
Mode).
123,45 Alpha-numerical display area for indication
of track, time or operation mode.
This area is also used for context depending
messages for example during player menus.
Note:
In case the message ' OVERHEAt OVERHEAt OVERHEAt OVERHEAt ' is displayed on the
display, the SADV 1250 R HD has become too hot.
Please make sure that the device is sufficiently supplied
with cooling air and that the air can freely flow around the
case of the device. Read and follow all instructions given
in chapter Setting up the
SADV 1250 R HD . Please do
not place the SADV 1250 R HD directly on top of other
hot devices like amplifiers etc.