T+A SACD 1260 R, User Manual

Page: 35 / 52

35
Controlling the mechanism
 Selects the previous track during playback.

Starts playback, selects the next track during
playback.
 Fast rewind to search for a particular
passage.
 Fast forward to search for a particular
passage.
After about 2 seconds the outputsignal is
muted.
During the search process the elapsed time
for the current track is shown on the left-hand
side of the screen. If the search reaches the
start or end of the CD, it halts.

Ends playback; the screen shows the
message: 'STOP' .
Opens and closes the CD drawer to STOP
mode.
 Pressing the

button briefly during
playback interrupts the current track; the
screen shows the message: 'PAUSE' .
A second press on the

button, or
pressing the

 

button, resumes
playback.

 

Starts playback.
This button is used to store a MEMO
program. If you are operating the menu
control system the
   
button is also used
as a confirmation button.
   
Brief press:
Selects the playback modes RPT TRACK /
RPT DISC / RPT PROG / RPT OFF
Long press:
Switch Mix mode on and off
Subsequent brief press:
Selects Mix mode
MIX / RPT MIX

 

 

Brief press:
Selects the digital filter (see ' Front panel
controls,
   
' )
Long press:
A long press toggles between normal and
inverted signal phase (see
' Front panel
controls,
   
' ).
      
Brief press:
Switches between CD and SACD layer (see
' Front panel controls,
   
' )
Selecting tracks by number
   

 

   
.
.
.
.
.
   
Numeric buttons
Numeric input for direct selection of a track
number.
When you press a numeric button (e. g.
   
) the screen shows the message:
'SELECT 1-' .
For a period of about 3 seconds a marker
flashes. During this time you may
•
press a second numeric button to
complete a two-digit track number - the
machine plays the selected track
immediately.
•
or press the
   
button; the input is
assumed to be a single-digit track
number – the machine plays the selected
track immediately.
•
If you do not press a second button and
the 3-second period is over, the input is
assumed to be a single-digit track
number - the machine plays the selected
track.
Note:
Even when the CD drawer is open a track
number can still be entered directly. The
drawer then closes automatically and
playback starts with the selected track.