T+A R 1230 R, User Manual

Page: 32 / 58

32
Front panel controls
   
   
Mains On / Off switch. Pressing the mains button    
switches the CD-Player on and off. When the machine is
switched on and ready to use the green LED glows.
Once switched on the CD player returns to the state in
which it was switched off. If the
CD-Player is connected
to a pre-amplifier, integrated amplifier or receiver as part
of an
'R' -system, then it can be switched to stand-by
mode by pressing the     button on the remote
control handset. In stand-by (ready) mode the unit is not
completely switched off.
   
Caution!
The mains button is not a mains isolation switch.
Even when the green LED is not glowing parts of the
machine remain connected to the mains power
supply. If the unit is not to be used for a long period
we recommend that you isolate it from the mains by
pulling out the mains plug at the wall socket.
   
CD drawer
Press the 
 
 button to open and close the drawer.
If the drawer is open it will also close automatically when
you press the

 

button, or if you enter a track
number using the remote control handset.
   
   
This button opens and closes the CD drawer.
   
   
This button starts playback of a CD, or continues play-
back after a
PAUSE .
   
   
This button interrupts playback, i.e. the currently running
track stops playing. Playback is resumed when you press
the
    or     button a second time.
   
   
Pressing the     button ends the playback process.
   
   
Pressing the     button switches the unit into four
different playback modes in turn. Each is displayed on
the screen briefly when selected:
REP ALL
REP TRACK
REP MIX
REP OFF
Note:
The

 

symbol on the screen glows continuously to
indicate that ‘REPEAT’ mode is in operation.