T+A R 1000 E, User Manual, Page: 34 / 68

34
Operating the CD player
Selecting CD as source Select the CD player as source by pressing the

button on the FM1000 ,
or by pressing the

button on the front panel of the R 1000 E twice.
Inserting a CD

Open the CD drawer (

on the front panel /

FM1000 )

Place the disc centrally in the appropriate depression in the drawer, with the
side to be played facing down .

Close the CD drawer (

on the front panel /

FM1000 )
When you close the drawer, the machine immediately reads the CD’s 'Table
of Contents'; the screen displays the message
'Reading' . During this period
all button-presses are ignored.
The screen then displays the total number of tracks on the CD in the drawer,
e.g.:
'13 Tracks 60:27' .

It is also shows the current mode of operation, e.g.
Front panel display

In CD mode the R 1000 E can be switched to either of two different screen
displays with a long press on the

button:

Large-format display:
Enlarged display of the most important information, clearly legible even from
a distance

Detail display:
Small-text display showing a large number of additional information points,
e.g. bit-rate etc.

Fig.
Large format display

Fig.
Detail display