14
Basic settings of the R 1000 E
System Settings (System configuration menu)
In the System configuration menu general device settings are adjusted. This menu is described in detail in the following
chapter.
Calling up and operating the
menu
Briefly press the
button on the front panel or on the remote control
handset to call up the menu.
When you open the menu, the following Select points appear on the screen:
* only visible with installed gateway module.
Use the
/
buttons to select a point in the menu.
If you wish to change a selected menu point, first press the
button,
and then use the
/
buttons to alter it.
After making the change, press the
button again to accept the
new setting.
You can press the
button at any time to interrupt the process; the
change is then abandoned.
A brief press on the
button also takes you back (higher) by one menu
level.
Press the
button again to leave the menu.
Source names
menu item
At this menu item you can activate and disable external sources, and assign a
plain text name to each source; this name then appears in the screen displays.
When you call up this menu item using the
button, a list of all the
external sources of the
R 1000 E
appears. Each source is followed by the
assigned name, or if you have disabled the source concerned the note
'
disabled
'
.
If you want to activate / disable a source, or change the plain text name,
navigate to the appropriate line.
To activate a source, press the green
button; pressing the red
button disables the source.
To change the plain-text name, move to the appropriate line and press the
button. Now use the alpha-numeric keypad of the
FM1000
to change
the name as required, then confirm your choice with
; this saves the
settings for that source.
The
button is used to switch between numeric and alpha-numeric input,
and between capitals and lower-case letters. Letters can be erased by pressing
the
button.
If you should wish to restore the factory default source name, erase the whole
name before saving the empty field with the
button: this action resets the
display to the standard source names.
The only available method of entering the name is to use the alpha-
numeric keypad on the remote control handset.
Summary of Contents for R 1000 E
